Cart

You have no items in your cart.

Wishlist

You have no items in your wishlist.

Flat Head 50 50 - 5' 8" x 19 1/2" x 2 5/16" x 27.9L - FCS II

From
$950.00
Length 5' 8"
Width 19 1/2"
Thickness 2 5/16"
Volume 27.9L
Glassing 4x4x4 Standard
Tailshape Squash
Fin Layout Thruster
Blank Type 50 50 Tech
Logo Placement Deck Position P
Logo Placement Bottom Position P
Fin System Left FCS II
Fin System Centre FCS II
Fin System Right FCS II
Fin Colour Left Black
Fin Colour Centre Black
Fin Colour Right Black
Extras 50 50 Carbon
Extras: None
Total // $0.00 AUD
Select Qty
Everything you need & nothing you don’t in this small wave machine. The Flathead continues to perform and is a true favourite.
Everything you need & nothing you don’t in this small wave machine. The Flathead continues to perform and is a true favourite.
Grease, Oil & Fuel. The smell of it in the garage as you tinker away on your Flathead. “Strip it back to the bare essentials”, that’s what the old guy would always say. “You want simplicity, reliability & responsiveness, then you’ll have yourself a good ride”. Chopper builders piece different bikes together to get exactly what they want. We’ve built our FLATHEAD with pieces of the SHOVEL HEAD & The TWIST. Only leaving the things that are necessary. Everything you need & nothing you don’t in this small wave machine. Ride on…

Built using the latest in EPS/Epoxy materials; the 50/50 technology combines a lightweight EPS core with High Grade Fibreglass Cloth Carbon Fibre Frame and Epoxy Resin:
Carbon Fibre Frame a parabolic carbon frame on the deck and linear carbon stringers on the bottom is designed to provide a controlled flex pattern! The familiar flex of the liner carbon stringers allows the rider to generate speed while the parabolic frame on the deck controls twisting through the front two thirds of the surfboard. With a highly responsive feel this layup allows the surfer to generate speed and drive with ease.
Expanded Polystyrene (EPS) foam is a version of polystyrene foam typically found in the core of Firewire surfboards. EPS is typically the lightest of the three foams used in surfboard construction resulting in a much lighter board translating to increased buoyancy and floatation. Basically the lowest density or lightest board will float you the best! The advantage of better buoyancy is added paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also less likely to deteriorate over time!

Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard – a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.

All 50/50 boards are constructed using a 36gram EPS core with a refined carbon fibre frame, each board is hand laminated using epoxy resign and high grade fibreglass on the deck providing a very light board that feels fast and responsive under your feet increasing performance in a wide variety of conditions!
Drive & speed 4/5
Wave height 1-4 ft
Movability 5/5
Paddle power 4/5

Stacey Flat Head Videos


Sign up for our newsletter